BMW R-Series Rear Frame Kit



or 4 payments of $149.99 with Info

2 Stock Left!

Calculate Shipping

Pickup from Ellaspede - $0.00
FREE PICKUP from Ellaspede, 8 Greet St, West End, Brisbane QLD 4101 between 7:30am-5:30pm Tuesday-Friday.

The Ellaspede BMW R-Series Rear Frame Kit replaces the original rear subframe with a stronger and custom friendly item that has been designed for easy installation.

Suitable for 1984-1995 BMW mono shock R65’s and R80’s, this subframe was designed to fit in with contemporary aesthetics and features an integrated battery tray and options to mount a custom seat, indicators or a custom rear guard.

Constructed from mild steel, the frame and battery box is then welded in house at Ellaspede before being powder coated in satin black. Overall length from mounting point to frame loop is reduced from the stock 650mm to 470mm.

The kit includes:

  • 1 x Frame assembly
  • 1 x Battery box
  • 4 x M8 x 20mm bolts
  • 4 x M8 nuts
  • 2 x M6 x 16mm bolts
  • 2 x M6 nuts
  • 2 x M6 washers
  • 1 x Thank you from Ellaspede

Note: This kit is designed for a mono shock BMW R65 and R80 with a stock BMW rear shock (not suitable for twin shock models). This product is made to suit an original 20-30 year old frame, some adjustments may be required when fitting given the treatment of your frame since new. 

Note: Laws may vary from country to country, state to state. Please check with your local transport authority prior to application of this product. Install at your own risk, if in doubt, consult a professional for installation.

Brand Ellaspede

Craftsmanship from around the globe

By: on 28 April 2019
While running into a former R65 Police bike i already had some ideas in mind regarding the redesign of the Boxer. Originally i wanted to weld the subframe myself, but when browsing the internet i ran into the Ellaspede Beemer and the subframe immediately caught my attention. 'Had to have that'.. So now with my last remaining savings spend on Dutch Customs i now own a well packages subframe for my R65. Time to start detailing it and figure out that swiveling seatpan design i drew up. Will take some time, but it will ride out!

Write a product review